• 首页
  • 期刊简介
  • 编委会
  • 投稿指南
  • 收录情况
  • 杂志订阅
  • 联系我们
引用本文:崔建昆,高先润.直线共轭少齿差行星齿轮传动仿真及实验研究[J].软件工程,2022,25(6):49-54.【点击复制】
【打印本页】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  
←前一篇|后一篇→ 过刊浏览
分享到: 微信 更多
直线共轭少齿差行星齿轮传动仿真及实验研究
崔建昆1,高先润2
(1.上海理工大学上海-汉堡国际工程学院,上海 200093;
2.上海理工大学机械工程学院,上海 200093)
jackcui@usst.edu.cn; 1055346460@qq.com
摘 要: 为了研究直线共轭齿廓在少齿差行星齿轮传动领域的性能特点,展开推导了直线共轭少齿差行星齿轮传动的数学模型,对其动态啮合力及振动特性进行仿真分析并进行了振动测试实验验证。结果表明,减速器性能表现良好,几种典型工况下啮合力最大误差值为7.01%,分析固定内齿轮第310,580 节点的振动加速度值在齿轮副进入啮合瞬间达到峰值。结论验证了减速器的振动加速度与输入转速、负载转矩呈正相关性,为直线共轭齿廓在少齿差行星齿轮传动领域的后续应用发展提供了理论基础与实例支撑。
关键词: 直线共轭;少齿差行星齿轮;动态仿真;振动测试
中图分类号: TP215    文献标识码: A
Simulation and Experimental Research on Linear Conjugate Planetary Gear Transmission with Small Tooth Difference
CUI Jiankun1, GAO Xianrun2
( 1.Shanghai-Hamburg College, University of Shanghai for Science and Technology, Shanghai 200093, China;
2.College of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China )
jackcui@usst.edu.cn; 1055346460@qq.com
Abstract: In order to study the performance characteristics of linear conjugate tooth profile in the field of planetary gear transmission with small tooth difference, this paper proposes to deduce a mathematical model of linear conjugate planetary gear transmission with small tooth difference. Its dynamic meshing force and vibration characteristics are simulated and analyzed, and the vibration test is conducted for verification. The results show that the reducer performs well, and the maximum error value of the meshing force under several typical working conditions is 7.01%. The vibration acceleration value of the 310,580th node of the fixed internal gear reaches the peak when the gear pair enters the meshing moment. The conclusion verifies that the vibration acceleration of the reducer is positively correlated with input speed and load torque. It provides theoretical basis and practical support for the subsequent application and development of linear conjugate tooth profile in the field of planetary gear transmission with small tooth difference.
Keywords: linear conjugate; planetary gear with small tooth difference; dynamic simulation; vibration test


版权所有:软件工程杂志社
地址:辽宁省沈阳市浑南区新秀街2号 邮政编码:110179
电话:0411-84767887 传真:0411-84835089 Email:semagazine@neusoft.edu.cn
备案号:辽ICP备17007376号-1
技术支持:北京勤云科技发展有限公司

用微信扫一扫

用微信扫一扫