• 首页
  • 期刊简介
  • 编委会
  • 投稿指南
  • 收录情况
  • 杂志订阅
  • 联系我们
引用本文:彭来湖,倪明捷,孙卓晟,徐步都.数控三轴弯圆机人机交互系统设计与实现[J].软件工程,2024,27(4):75-78.【点击复制】
【打印本页】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  
←前一篇|后一篇→ 过刊浏览
分享到: 微信 更多
数控三轴弯圆机人机交互系统设计与实现
彭来湖1,3, 倪明捷2, 孙卓晟3, 徐步都3
(1.浙江理工大学机械工程学院, 浙江 杭州 310018;
2.浙江理工大学信息科学与工程学院, 浙江 杭州 310018;
3.浙江理工大学龙港研究院, 浙江 温州 325000)
laihup@zstu.edu.cn; 1090114155@qq.com; xiaosun81663875@163.com; ab55599@qq.com
摘 要: 针对传统弯曲型材加工设备运行时不稳定、加工效率低、加工成本高以及操作界面复杂等问题,设计了弯圆机人机交互系统。主要介绍了上位机软件的设计与实现过程,包括逻辑算法、用户交互、通信处理以及数据存储等模块的设计方法。上位机软件使用Qt Creator编程软件进行开发,以TCP/IP协议作为通信总线实现数据交互,使用二进制文件和SQLite数据库存储数据。结果表明,根据所述方法设计的人机交互系统在实际生产中,型材加工精度误差小于1 mm,并且该系统具有性能稳定、功能齐全等优点,能够满足弯曲型材加工市场的需求。
关键词: 弯圆机;人机交互系统;Qt Creator;TCP/IP协议;SQLite
中图分类号: TP271    文献标识码: A
Design and Implementation of Human-Computer Interaction System for CNC Three-axis Bending Machine
PENG Laihu1,3, NI Mingjie2, SUN Zhuosheng3, XU Budu3
(1.School of Mechanical Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China;
2.School of In f ormation Science and Engineering, Zhejiang Sci-Tech University, Hangzhou 310018, China;
3.Research Institute of Zhejiang Sci-Tech University in Longgang, Wenzhou 325000, China)
laihup@zstu.edu.cn; 1090114155@qq.com; xiaosun81663875@163.com; ab55599@qq.com
Abstract: Aiming at the problems of instability, low processing efficiency, high processing costs, and complex operation interfaces in traditional bending profile processing equipment, this paper proposes to design a human-machine interaction system for bending machine. This paper mainly introduces the design and implementation process of the upper computer software, including the design methods of logic algorithms, user interaction, communication processing, and data storage modules. The upper computer software is developed by using Qt Creator programming software, and the TCP/IP protocol is used as the communication bus to realize data interaction. Binary files and SQLite databases are used to store data. The results show that the proposed human-machine interaction system has a processing accuracy error of less than 1 mm in actual production, and the system runs stably with full functions, which can meet the processing needs of the bending profile processing market.
Keywords: bending machine; human-machine interaction system; Qt Creator; TCP/IP protocol; SQLite


版权所有:软件工程杂志社
地址:辽宁省沈阳市浑南区新秀街2号 邮政编码:110179
电话:0411-84767887 传真:0411-84835089 Email:semagazine@neusoft.edu.cn
备案号:辽ICP备17007376号-1
技术支持:北京勤云科技发展有限公司

用微信扫一扫

用微信扫一扫