• 首页
  • 期刊简介
  • 编委会
  • 投稿指南
  • 收录情况
  • 杂志订阅
  • 联系我们
引用本文:谢宇洋,卜宁远.等几何分析细化收敛性研究[J].软件工程,2022,25(8):11-14.【点击复制】
【打印本页】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  
←前一篇|后一篇→ 过刊浏览
分享到: 微信 更多
等几何分析细化收敛性研究
谢宇洋,卜宁远
(上海理工大学机械工程学院,上海 200093)
826647688@qq.com; BNY19971997@163.com
摘 要: 传统有限元分析软件中,CAE模型和CAD模型的数据不一致会造成计算结果的误差,为避免模型转换造成的分析误差提出等几何分析算法。等几何分析算法基于设计和分析统一模型,实现模型从几何设计到力学仿真的无缝集成。采用NURBS曲线分片方法建立几何模型并实现体参数化表达,使用二分K细化方法对CAD模型处理后,用等几何分析算法进行力学分析。等几何分析算法的计算结果与有限元分析软件结果对比,模型不需要转换和离散且保证了模型边界的光滑,更少的模型数据可以得到精确的结果,同时通过相同节点数和单元数的模型分析,等几何分析计算结果收敛更快。
关键词: 有限元;等几何分析;NURBS曲线;K细化
中图分类号: TP391.41    文献标识码: A
Research on Convergence of Refinement of Isogeometric Analysis
XIE Yuyang, BU Ningyuan
(School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China)
826647688@qq.com; BNY19971997@163.com
Abstract: Data inconsistency between CAE and CAD models in traditional finite element analysis software leads to errors in calculation results. In order to avoid analysis errors caused by model conversion, this paper proposes an isogeometric analysis (IGA) algorithm, which is based on a unified model for design and analysis, and realizes seamless integration of models from geometric design into mechanical simulation. NURBS curve slicing method is used to establish the geometric model and realize the volume parameter expression. After the CAD model is processed by the bipartite K refinement method, the mechanical analysis is carried out by the isogeometric analysis algorithm. Compared with the results of the finite element analysis software, the proposed model does not need to be converted and dispersed, and the model boundary is smooth. Less model data can obtain accurate results. At the same time, Isogeometric analysis results converge faster for the model analysis with the same number of nodes and elements.
Keywords: finite element; isogeometric analysis; NURBS curve; K refinement


版权所有:软件工程杂志社
地址:辽宁省沈阳市浑南区新秀街2号 邮政编码:110179
电话:0411-84767887 传真:0411-84835089 Email:semagazine@neusoft.edu.cn
备案号:辽ICP备17007376号-1
技术支持:北京勤云科技发展有限公司

用微信扫一扫

用微信扫一扫