• 首页
  • 期刊简介
  • 编委会
  • 投稿指南
  • 收录情况
  • 杂志订阅
  • 联系我们
引用本文:胡学军,李嘉诚.基于非均匀有理B样条的多尺度三维建模研究[J].软件工程,2022,25(5):36-38.【点击复制】
【打印本页】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  
←前一篇|后一篇→ 过刊浏览
分享到: 微信 更多
基于非均匀有理B样条的多尺度三维建模研究
胡学军1,李嘉诚2
(1.上海理工大学机械工程学院,上海 200093;
2.上海电力大学能源与机械工程学院,上海 200240)
HXJ20161645@163.com; jiujiuniansheng@163.com
摘 要: 机械加工零件时,由于加工误差的存在导致模型表面不够光滑。传统计算机辅助设计方法在构建机械零件模型时,无法对零件表面进行表达,因此提出一种随机生成点的算法来模拟零件表面因粗糙度导致波峰、波谷的出现。为了保证生成的点在零件粗糙度范围内,将某一范围作为约束得到所需要点的坐标,然后将点插入利用非均匀有理B样条表达的模型,使建模能够更接近真实零件。最终得到的模型实现了宏观尺度上模型结构的表达和微观尺度上模型表面质量的表达。该算法实现点的随机生成,生成数据有60%符合要求,可用于体参数化建模,实现模型宏观结构与微观波峰、波谷的表达。
关键词: 多尺度;非均匀有理B样条;三维建模
中图分类号: TP391.4    文献标识码: A
Research on 3D Modeling of Multi-scale based on Non-uniform Rational B-spline
HU Xuejun1, LI Jiacheng2
( 1.School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;
2.Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai 200240, China )
HXJ20161645@163.com; jiujiuniansheng@163.com
Abstract: When machining parts, model surface is not smooth enough due to processing errors. Traditional computeraided design method cannot express part surface when constructing the mechanical part model. Therefore, this paper proposes an algorithm of randomly generating points to simulate the appearance of the peaks and valleys caused by the roughness of part surface. In order to ensure that the generated points are within the roughness range of the part, a certain range is used as a constraint to obtain the coordinates of the required points, and then the points are inserted into the model expressed by non-uniform rational B-spline so that the modeling can be closer to the real part. The final model can realize the expression of the model structure on the macroscale and the expression of the surface quality of the model on the microscale. The algorithm realizes random generation of points, and 60% of the generated data meets the requirements and can be used for volume parametric modeling, realizing the expression of peaks and valleys of the model on both the macroscopic and microscopic structure.
Keywords: multi-scale; non-uniform rational B-spline; 3D modeling


版权所有:软件工程杂志社
地址:辽宁省沈阳市浑南区新秀街2号 邮政编码:110179
电话:0411-84767887 传真:0411-84835089 Email:semagazine@neusoft.edu.cn
备案号:辽ICP备17007376号-1
技术支持:北京勤云科技发展有限公司

用微信扫一扫

用微信扫一扫