• 首页
  • 期刊简介
  • 编委会
  • 投稿指南
  • 收录情况
  • 杂志订阅
  • 联系我们
引用本文:陈为政,彭来湖,唐麒麟.基于三次样条拟合模型的喷雾加油装置油位检测算法改进[J].软件工程,2022,25(4):48-53.【点击复制】
【打印本页】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  
←前一篇|后一篇→ 过刊浏览
分享到: 微信 更多
基于三次样条拟合模型的喷雾加油装置油位检测算法改进
陈为政1,彭来湖1,2,唐麒麟1
(1.浙江理工大学浙江省现代纺织装备技术重点实验室,浙江 杭州 310018;
2.杭州旭仁自动化有限公司,浙江 杭州 310018)
936753998@qq.com; 43233212@qq.com; 765834836@qq.com
摘 要: 针对针织圆纬机[1]喷雾加油装置[2]无法精准预测和受控计量问题,设计了基于ARM平台的喷雾加油系统,实现信号采样、信号处理、人机交互及润滑控制等功能。由于圆纬机振动引起装置油桶液面波动,导致油位检测精度下降,虽已开发出基于最小二乘法的线性回归模型的油位检测算法,但为进一步提高精度,开发出基于三次样条拟合的油位检测算法。通过残差分析、测试对比,表明三次样条拟合模型优于线性回归模型,三次样条拟合优度达0.9921,较之线性回归模型,拟合优度同比提升0.674%,能够进一步提高喷雾加油装置的工作准确性及稳定性。
关键词: 喷雾加油装置;三次样条拟合;残差分析
中图分类号: TP311    文献标识码: A
Improvement of Oil Level Detection Algorithm for Spray Fueling Device based on Cubic Spline Fitting Model
CHEN Weizheng1, PENG Laihu1,2, Tang Qilin1
( 1.Key Laboratory of Modern Textile Equipment Technology, Zhejiang Sci-tech University, Hangzhou 310018, China ;
2.Hangzhou Xuren Automation Limited Company, Hangzhou 310018, China)
936753998@qq.com; 43233212@qq.com; 765834836@qq.com
Abstract: Aiming at the problem that the spray refueling device[1] of the circular weft knitting machine[2] is unable to accurately predict and control the measurement, this paper proposes to design a spray refueling system based on ARM platform to realize functions of signal sampling, signal processing, human-computer interaction and lubrication control. Due to the vibration of the circular weft knitting machine, the oil tank liquid level of the device fluctuates, which leads to the decline of the oil level detection accuracy. Although an oil level detection algorithm based on the linear regression model of the least squares method has been developed, an oil level detection algorithm based on cubic spline fitting is developed in order to further improve the accuracy. The residual analysis and test comparison show that the cubic spline fitting model is better than the linear regression model, and the cubic spline fitting goodness reaches 0.9921. Compared with the linear regression model, the fitting degree has increased by 0.674% over the same period of last year, which can further improve the accuracy and stability of the spray refueling device.
Keywords: spray refueling device; cubic spline fitting; residual analysis


版权所有:软件工程杂志社
地址:辽宁省沈阳市浑南区新秀街2号 邮政编码:110179
电话:0411-84767887 传真:0411-84835089 Email:semagazine@neusoft.edu.cn
备案号:辽ICP备17007376号-1
技术支持:北京勤云科技发展有限公司

用微信扫一扫

用微信扫一扫