• 首页
  • 期刊简介
  • 编委会
  • 投稿指南
  • 收录情况
  • 杂志订阅
  • 联系我们
引用本文:陶文兵,沈景凤,王正东,田 顺.基于ABAQUS的C型金属阻尼器仿真设计[J].软件工程,2020,23(6):1-4.【点击复制】
【打印本页】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  
←前一篇|后一篇→ 过刊浏览
分享到: 微信 更多
基于ABAQUS的C型金属阻尼器仿真设计
陶文兵,沈景凤,王正东,田 顺
(上海理工大学机械工程学院,上海 200093)
740162240@qq.com; sh_jf@163.com; 1215095764@qq.com; 1115631065@qq.com
摘 要: 针对目前C型金属阻尼器在阻尼单元尺寸结构设计方面存在尺寸参数过少,结构过于简单和实际应用 中的效果误差太大等问题。应用分类和系统设计方法,基于参数模型模拟阻尼器在受力载荷下时应力应变情况,运用 ABAQUS对三款不同初始角度的金属阻尼器单元进行了仿真设计,结果表明三款阻尼单元弹塑性过渡阶段、塑性阶段后 的屈服刚度与初始刚度的比值分别在2.8和17左右,与工程应用中的钢材经验计算比值3和20十分接近,符合实际状况。
关键词: 金属阻尼;单元设计;仿真;ABAQUS
中图分类号: TP319    文献标识码: A
Simulation Design of C-Type Metal Damper based on ABAQUS
TAO Wenbing, SHEN Jingfeng, WANG Zhengdong, TIAN Shun
( School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China)
740162240@qq.com; sh_jf@163.com; 1215095764@qq.com; 1115631065@qq.com
Abstract: There are many problems in design of damping element size structure for C-type metal damper, including too few dimension parameters, over-simpli ed structure, big effect error in practical application, etc. Through the method of classi cation and system design, the stress and strain of the damper are simulated based on the parameter model. Three metal damping elements with different initial angles are designed by using ABAQUS. The results show that the ratios of yield stiffness to initial stiffness of three damping elements are around 2.8 and 17, respectively during and after the elastic-plastic stage, which are very close to the ratios of 3 and 20 in empirical calculation of steel in engineering application, in line with the actual situation.
Keywords: metal damping; unit design; simulation; ABAQUS


版权所有:软件工程杂志社
地址:辽宁省沈阳市浑南区新秀街2号 邮政编码:110179
电话:0411-84767887 传真:0411-84835089 Email:semagazine@neusoft.edu.cn
备案号:辽ICP备17007376号-1
技术支持:北京勤云科技发展有限公司

用微信扫一扫

用微信扫一扫